top of page
  • Writer's pictureWorkDone

35inch HDD Carrier 14th Generation

3.5" SAS SATA Hard Drive Caddy Accessory for 14th Generation Dell EMC PowerEdge Servers - Hot Swap Bracket DXD9H - Easy Setup with Detailed Installation Manual

  • WHAT YOU GET: 3.5" Hard Drive Caddy for Dell EMC PowerEdge Servers, 4 x HDD drive mounting screws, Detailed installation manual, Worry-free 4 -year warranty

  • READY TO INSTALL: 14th Generation Servers: R440, R540, R640, R740, R740xd, R940, R6415, R7415, R7425, XC640-4/4i, XC740xd-12 and 12C, 12R, C6420 Enclosure (not c6420 Sled)

  • FINAL CHECKLIST: Suitable DELL servers with 3.5" chassis and hot-plug backplanes. NOT suitable for servers with a stand-alone backplane or 2.5" chassis. HDD is not included. Compatible part numbers: X7K8W and 0X7K8W

  • GUARANTEE: Try them out for yourself, install to your server, and if you aren’t happy with the compatibility, or for any reason at all, then we’ll be more than happy to give you an immediate refund. 4-YEAR PRODUCT WARRANTY

Product description

Press the release button to open the release handle and slide hot plug caddy for inside or outside of your server. The Hot-Plug PowerEdge Caddy 3.5 is for connecting a hard drive to a server backplane. Your server backplane is connected to a DELL PERC RAID controller. After installation, you can adjust or create RAID Volume from the RAID controller menu.

Here’s What’s Included:

  • DELL PowerEdge OEM Caddy Sled for 3.5 inch SAS or SATA Hard Drives

  • 4 mounting screws

  • Detailed installation manual

  • Compatibility Sheet Information PDF-Guide (sent from merchant e-mail)

  • Worry free 4 year warranty

DELLBLADE drive trays are one by one checked and packed. You can find that new type desing has wider compatibility with DELL PowerEdge 14th Generation servers.

Order Your DELLBLADE 3.5" server Hot Swap HDD caddy accessory Today and Ensure a Smooth Installation

18 views0 comments


bottom of page